Easy One Skein Scarf Knitting Pattern with Tapered Ends

Light blue chunky knit one skein scarf with tapered ends draped around the neck

A one skein scarf is a scarf you can knit from a single ball of yarn, and the Simplicity Scarf from Leelee Knits is one of the easiest ways to do it. You need about 109 yards of bulky wool and 6.5 mm needles, and the finished scarf measures 46" long with neat tapered ends that tuck flat under a winter coat. If you can cast on, knit and purl, you can follow the free video tutorial from start to finish.
The design starts with just 5 stitches, grows to full width with simple increases, runs straight in stockinette and then narrows back down to 5 stitches at the other end. A slipped stitch edge keeps the sides from curling, which is the usual problem with stockinette scarves. It is a quick, satisfying project for chilly evenings and a very good candidate for last-minute Christmas gifts, since one skein per scarf keeps the cost low.

Simplicity Scarf at a Glance

  • Designer: Alnaar, Leelee Knits
  • Skill level: easy, beginner friendly (you should already know how to cast on, knit and purl)
  • Finished size: 46" / 117 cm long and 6.5" / 16.5 cm wide at the midpoint, after blocking
  • Yarn: 1 skein of bulky weight yarn, approx. 109 yds / 100 m
  • Needles: US 10.5 (6.5 mm)
  • Gauge: 13 stitches and 14 rows = 4" / 10 cm in stockinette stitch, after blocking
  • Construction: knit flat in rows, from one tapered end to the other
  • Video length: about 29 minutes

Light blue chunky knit one skein scarf with tapered ends draped around the neck

What You'll Need

  • Bulky weight yarn: 1 skein, about 109 yards / 100 meters. The sample is knit in MODE at Rowan Chunky Wool (100% wool) in the colour Bondi, a soft light blue.
  • US 10.5 (6.5 mm) knitting needles
  • A yarn needle for weaving in the ends
  • Scissors

The designer points out that bulky yarns vary a lot in thickness and texture, so the same yarn is the safest choice if you want your scarf to match hers. If you substitute, knit a small gauge swatch first and check it against 13 stitches per 4 inches, because a thicker yarn will eat through your single skein before the second tapered end is finished.
Skein of bulky light blue wool yarn with 6.5 mm wooden knitting needles, scissors and a yarn needle

How the One Skein Scarf Comes Together

The video follows the scarf in the same order you knit it, with the row instructions shown on screen as each section is worked. The free written pattern on the designer's blog (linked in the credit below) has the full row-by-row details.

25 Knitting Patterns of The Most Wonderful Hats ebook
From the Urbaki Store
Knitting winter accessories? Get 25 hat patterns in one illustrated guide.
An illustrated page for every project with a direct link to the free pattern, plus 2 printable bonus guides. Free updates and a 60-day money-back guarantee.
See what's inside →
🧶 New: The Knitting Club opens in January, one project a month with weekly help. Join the free waitlist for a founding-member price.
  1. Cast on 5 stitches. The scarf begins with a long-tail cast on and a short setup row, so the first tapered end starts as a tiny point.
  2. Increase for the first tapered end. From around the 3-minute mark, the video shows how to work M1R and M1L increases on the right side rows. The stitch count grows on the right side rows, which gives the end its gentle triangle shape.
  3. Add the slipped stitch edge. On the wrong side rows, the first and last stitches are slipped purlwise with the yarn in front. This builds a firm, chain-like border on both sides and stops the stockinette from rolling inward.
  4. Knit the straight section. Once the scarf reaches full width (shown at about 16 to 19 minutes), you keep working stockinette with the slipped stitch edge until the scarf is long enough to start the second end.
  5. Decrease for the second tapered end. K2tog and SSK decreases mirror the increases, bringing the scarf back down to 5 stitches. This part starts around the 21-minute mark.
  6. Cast off in pattern. The last 5 stitches are cast off so the final row matches the setup row at the other end.
  7. Weave in the ends and block. The video closes with wet blocking, which evens out the stitches and helps the scarf drape softly.

Tapered end of a chunky knit scarf in stockinette stitch with a neat slipped stitch edge on the needle

Tips for a Neat Finish

  • Keep the slipped stitches relaxed. Pull the working yarn snug, but not tight, as you bring it to the back after the slipped stitch. A tight edge will pull the scarf into a slight curve.
  • Mark the right side. Stockinette looks very different on each side, so a removable stitch marker on the right side makes it easy to know whether the next row is an increase row or a plain row.
  • Watch your yarn at the halfway point. Both tapered ends use roughly the same amount of yarn. If you weigh your skein before you start, you can check that you still have a little more than half left when you begin the decreases.
  • Don't skip blocking. Chunky stockinette can look uneven straight off the needles. A gentle wet block, as shown at the end of the video, makes a big difference to how the scarf hangs.
  • Pick colours for gifting. Because each scarf uses one skein, it is easy to make a small batch in different shades. Our list of knitted Christmas gift ideas has more quick projects to pair with it.

Close-up of the slipped stitch edge on a light blue chunky knit scarf worn over a grey top
If you enjoy small projects like this one, have a look at these one-skein knitting ideas for last-minute gifts or these easy beginner knit scarves you can finish fast. For something in the round, the Seed Stitch Cowl is another cozy beginner pattern.

Images and patterns courtesy of Leelee Knits

Enjoy the Video Tutorial

Source: Leelee Knits on YouTube

Frequently Asked Questions

How much yarn do I need for a one skein scarf?

For the Simplicity Scarf you need one skein of bulky weight yarn with about 109 yards (100 meters). The sample uses MODE at Rowan Chunky Wool.

Is this scarf suitable for beginners?

Yes, as long as you already know how to cast on, knit and purl. The pattern adds a few new skills, M1R and M1L increases, K2tog and SSK decreases and a slipped stitch edge, and the video shows each one up close.

Why does this scarf have tapered ends?

The narrow ends make the scarf less bulky where it crosses at the neck, so it tucks neatly under a winter coat. They also give it a tidy, finished look without fringe.

More from Leelee Knits

urb22kni

You may also like

Go up