DIY Round Coffee Table

I wanted to build a round coffee table for a while but wasn't sure about the design.
I started building this with a design in mind, then completely changed gears mid-build.
I ended up adding some bronze accents for a modern feel.

We hope you enjoy watching this video about How to Build a Round Coffee Table

Source: 3x3Custom - Tamar

Tools & Finish

  • Dowel Jig
  • Dowel Center Points
  • Router
  • Countersink Bit
  • Brad Point Bits
  • Makita Impact Bits
  • RIDGID Reciprocating Saw
  • Diablo Metal Cutting Blades
  • Brass Bristle Brush
  • 30 Minute Epoxy
  • Aqua Tone Stain
  • Dewaxed Shellac
  • Wood Grain Filler
  • Aqua Thane Satin Topcoat


  • 2 - 1x6 boards at 10 ft long
  • 2 - 1x6 boards at 12 ft long
  • Dowels
  • 8 - 14" pieces of 1/4" Brass Rod
  • 4 - Wheels

Cut List

This table is 35" wide and 17" tall.

Did you find this post Useful or Inspiring? Save THIS PIN to your Woodworking Board on Pinterest! 😊

Ok, That is all for now…

We hope that you enjoyed the content.

See you in the next post!

You may also like πŸ‘‡πŸΌπŸ‘‡πŸΌ

Go up